Your quality "HUGGER"
cover will deliver years of valuable protection for
Remember these helpful tips:
Cover a CLEAN VEHICLE
only. Dust, dirt, and grit between your cover and
the finish can cause scratches, swirls, abrasion
and dullness. Because all of our fabrics are breathable,
your vechicle does not have to be fully dry before
you put on the cover.
on a CLEAN "HUGGER COVER". Bringing dirt
to a clean vehicle via the cover only increases
the odds of damage. Spot cleaning when necessary
will minimize this risk.
off a clean cover. If your cover has collected
dirt, leaves, etc, clean it off before you remove
it from your vehicle.
your "HUGGER COVER" off the ground. If
your cover should touch the ground, shake it out
and make sure it is free of dirt and grit.
going on, fold up going off. NEVER drag or slide
your cover--sideways motion could cause particles
of grit to scratch the surface of your vehicle.
Some vehicles may have sharp
bumpers, hood ornaments or moldings. You can minimize
abrasion and the possibility of tearing the cover
by reinforcing the inside of the cover and taking extra
care when installing and removing the cover.
If the vehicle has just been
driven, be careful not to allow the cover to come
in contact with hot exhaust pipes.
Washing your Hugger Cover is Easy:
covers may be washed in cold water. Dry on low
heat. Remove the cover from the dryer while still
damp and stretch into shape over your vehicle.
Premium Outdoor covers may be hosed down right on the
vehicle. If you use detergent, it must be rinsed
completely away. Failure to do so will cause leakage.
If leakage develops spray with scotchguard or similar
water repellent treatment.
may develop under Premium Outdoor covers as a result
of changes in humidity or during heavier rainfalls.
This will evaporate through the cover when weather